Installation Kalyway DualBoot 10.5.2 (Pendiente)

Publicado: 09/08/2011 en os x

1) Reboot your computer with the Kalyway disk in the drive.

2) Press any key to boot from the CD. Note: If your computer boots into XP, you must restart and hold down DEL until you enter BIOS setup. Find the section where it lists your first second and third boot devices. This is usually inside the first link on the main menu. Use PGUP/PGDN to change the first boot device to CD, then the second to HDD. Press F10 to save settings (type Y in the box that pops up) and then exit setup. If you need further BIOS help, search for it on another site.

3) When it says “Starting Mac OS X Installer”, press F8.

4) Type -v and press enter.

5) Grab yourself a coffee or a biscuit. You’ve done well so far, this part may take a while.

6) When all that text has gone, you should have come to a language selection screen. Click the arrow to use English as the primary language.

7) When the welcome box pops up, don’t click Continue. Click Utilities in the menu bar, then Disk Utility.

8) Select the Mac partition. You should easily be able to tell which one it is by clicking a partition in the sidebar, then looking at the size down the bottom. If the Available is more than a few MB lower than the Capacity, then that is your Windows partition. DO NOT SELECT THIS ONE. Select the other partition which should be above or below this one in the sidebar and have almost no difference between the capacity and avaliable space. Note: Even if you have checked this, make doubly sure! There should be around a 2GB difference between the Windows partition’s capacity and available space.

9) With the correct partition selected, click the Erase tab.

10) Open the drop-down menu and select Mac OS Extended (Journaled). “Make no mistakes here. We are turning a previously tailored FAT32 partition into Macs native file system. Failing to do this will most probably lead to this error at later stage of installation – can not copy some files to /volume/name* ”

11) Enter a name* and keep it simple. Some examples are “mac”, “leopard” and “osx” (without quotes and *). DO NOT USE A SPACE OR A SPECIAL CHARACTER LIKE ! OR & IN THE NAME!

12) Click Erase and then Erase again in the box that comes up.

13) This shouldn’t take long at all, and then you’ll find the partition you selected to erase is now called whatever name you gave it. Exit Disk Utility by clicking the red button in the corner. You’re now back at the Welcome screen.

14) Click Continue and then click agree.

15) In the Installation Destination screen, click the partition that has the name you just gave it. Then click continue.

16) In the next screen, click Customize. As long as you are using the 10.5.2 disk, you should have not much to worry about. You don’t need to select MBR like in the previous release. Don’t select a different kernel unless you know what you are doing, the default one is good. There should be a section called Applications, which has some great apps you can have installed by default, eg Adium (an amazing instant messaging client) VLC (one of the best media players) and much more.

17) Once you’re finished click Done. Then click install. Note: The media check will begin after you have finished the install. This ensures that the disk has all the necessary files to install OS X. If you REALLY want to, you can skip the check, however, checking the media is the best way to ensure a safe install.

18) The media check takes a fair while and depending on the amount of RAM, so will the install. If you have 1GB, then the actual install should complete in about 15 min.

19)Once it’s done, you’ll have to reboot. As it reboots, put the GParted CD in the drive.

20) Wait for it to load (window and all) then right-click on your Windows partition (it has a file system of NTFS). Click Manage Flags.

21) Tick the box for boot. Click OK.

22) Click quit on the desktop and when prompted, take the CD out. Reboot.

http://wiki.osx86project.org/wiki/index.php/Installation_Guides/Kalyway_DualBoot_10.5.2

Responder

Introduce tus datos o haz clic en un icono para iniciar sesión:

Logo de WordPress.com

Estás comentando usando tu cuenta de WordPress.com. Cerrar sesión / Cambiar )

Imagen de Twitter

Estás comentando usando tu cuenta de Twitter. Cerrar sesión / Cambiar )

Foto de Facebook

Estás comentando usando tu cuenta de Facebook. Cerrar sesión / Cambiar )

Google+ photo

Estás comentando usando tu cuenta de Google+. Cerrar sesión / Cambiar )

Conectando a %s